BENDIX BW1552 Manual de usuario

Busca en linea o descarga Manual de usuario para Compresores de aire BENDIX BW1552. BENDIX BW1552 User's Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 6
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
1
®
Bendix
®
Inlet Regulating Valve or IRV
™
for Compressors
SD-01-3408
SAFETY
VALVE
OUTLET
SPRING
TURBOCHARGER
SUPPLY PORT 3/4” NPT
OUTLET FLANGE
(MATES TO
COMPRESSOR INLET)
VENT
MOUNTING
HOLE
VALVE SEAT
O-RING
CAP NUT
O-RING
SPACER
FIGURE 1 - COMPRESSOR INLET REGULATING VALVE
FIGURE 2 - INLET REGULATING VALVE
DESCRIPTION
The IRV
™
inlet regulating valve is intended for use on
multi-cylinder compressors which receive their induction
air supply from the pressure side of the engine turbocharger.
The IRV
™
valve may not be used in conjunction with single
cylinder compressors including the Bendix
®
BX-2150
™
compressor. Generally mounted directly at the compressor
air inlet, the IRV
™
valve is designed to regulate compressor
inlet pressure to 10 psi or less.
The cast aluminum body incorporates an outlet flange which
is capable of mating with all Bendix compressor inlet flanges
except that of the Tu-Flo
®
300 compressor. A 3/4 inch female
pipe thread in the IRV
™
valve cap nut facilitates connection
to the engine induction system or turbocharger. High
MOUNTING
HOLE
O-RING
PISTON
VALVE &
PISTON
ASSEMBLY
TURBOCHARGER
SUPPLY PORT
SAFETY
VALVE
EXHAUST PLUG
OUTLET
BODY
SPRING
VALVE
O-RING OR
U-CUP
O-RING
O-RING
HOUSING
VALVE
Vista de pagina 0
1 2 3 4 5 6

Indice de contenidos

Pagina 1 - for Compressors

1®Bendix® Inlet Regulating Valve or IRV™ for CompressorsSD-01-3408SAFETYVALVEOUTLETSPRINGTURBOCHARGERSUPPLY PORT 3/4” NPTOUTLET FLANGE(MATES TOCOMPRES

Pagina 2 - OPERATION

2FIGURE 3 - COMPRESSOR EITHER LOADED ORUNLOADED WITH LOW TURBOCHARGER PRESSUREOUTLETTOCOMPRESSORtemperature o-rings, seals, seats, and lubricant are

Pagina 3 - PERSONAL INJURY OR DEATH:

3FIGURE 6 - SAFETY VALVE OPERATIONWith the compressor unloaded air demand ceases and theIRV™ valve closes as turbo supply pressure exceeds 5 psi.The

Pagina 4 - OPERATIONAL TESTS (FIGURE 8)

4FIGURE 8 - IRV™ VALVE TEST APPARATUSOPERATION & LEAKAGE TESTS(Figures 7 & 8)GENERALIn order to test the operation of the IRV™ valve it will b

Pagina 5 - INSTALLATION

5FIGURE 9 - INLET REGULATING VALVE4. Adjust shop air to the IRV™ valve to 5 psi and allow thecompressor to build the vehicle air system pressure togo

Pagina 6 - ASSEMBLY

6BW1552 © 2004 Bendix Commercial Vehicle Systems LLC All rights reserved. 3/2004 Printed in U.S.A.CLEANING & INSPECTION1. Using mineral spirits,

Comentarios a estos manuales

Sin comentarios