BENDIX TCH-005-001 Manual de usuario descargar pdf

Technical Bulletin

Bulletin No.: PRO-05-01 Effective Date: 5/23/77 Cancels: PRO-05-01 dated 4/6/76 Page: 1 of 3

Subject: AUTOMATIC SLACK ADJUSTER INSTALLATION

INFORMATION

Every Automatic Slack Adjuster sold through the Aftermarket Division includes

BWS-582 Installation Instructions which contain important information regarding a retrofit

installation. A copy of the instruction sheet was forwarded on Bulletin 05-1 and we

suggest that you retain and carefully review the procedures.

Of particular importance is the statement on page 2 which reads:

IMPORTANT: The position of the adjusting crank and linkage (to the right or left

in Fig. #1) must not be changed in relation to the slack adjuster. Altering the

position of this mechanism (from one side to another) will cause a malfunction.

Also, to insure proper operation, it is recommended that the Bendix Automatic Slack

Adjuster be used in retrofit installations only with chamber sizes of Type 16 or larger.

The Bendix “Sure Stroke” Automatic Slack Adjuster is a device with great sales potential

to the OE specification and retrofit market. However, as with any new device, proper

installation is of prime importance. If you have any questions regarding installation of

the “Sure Stroke”, please contact your Bendix HVSG representative.

1 2 3

Technical BulletinBulletin No.: PRO-05-01 Effective Date: 5/23/77 Cancels: PRO-05-01 dated 4/6/76 Page: 1 of 3Subject: AUTOMAT

The Bendix Sure Stroke Automatic Slack Adjuster can easily replace most standardslack adjuster installations providing some simple considerations are

C. Turn the external ¾” adjusting hex in the direction indicated by the arrow on thecrank arm, until the brake chamber push rod enters the slack adju

Sin comentarios

BENDIX TCH-005-001 Manual de usuario