BENDIX MC-30 TRAILER ABS CONTROLLER Información técnica descargar pdf (Pagina 10)

Reconﬁ guring EC-60

™

Controllers

SYSTEM CONFIGURATION

The EC-60

™

controller is designed to allow the technician to

change the default system settings (chosen by the vehicle

OEM) to provide additional or customized features. When

replacing an ECU, be sure to use an equivalent Bendix

replacement part number so that the standard default set-

tings are provided.

Depending on the model, the customizable features include

ABS control settings, engine module communication etc.

Many of these settings can be reconﬁ gured using a hand-

held or PC-based software, such as the Bendix

ACom

™

Diagnostics program.

ECU RECONFIGURATION

Reconﬁ guring Standard ECUs

Reconﬁ guring an EC-60

™

controller may be carried out by

using the Blink Code Switch or by using a hand-held or

PC-based diagnostic tool.

Note: During the reconﬁ guration process, and independently

from any reconﬁ guration being carried out by the technician,

standard ECUs automatically check the J1939 serial link

and communicate with other vehicle modules. In particular,

if the serial link shows that the vehicle has a retarder device

present, the ECU will conﬁ gure itself to communicate with

the retarder device for improved ABS performance. For

example, if the ECU detects the presence of a retarder

disable relay during a reconﬁ guration, it will conﬁ gure

itself to control the relay to disable the retarding device

as needed.

Reconﬁ guring Premium ECUs

As with standard ECUs, the Premium EC-60

™

controller

also carries out, independently from any reconﬁ guration

being carried out by the technician, an automatic check

of the J1939 serial link and communicates with other

vehicle modules. This includes checking for ATC and

retarder disable relay operation. In addition, premium

EC-60

™

controllers will determine the number of wheel

speed sensors and PMVs installed and conﬁ gure itself

accordingly.

6S/5M Conﬁ guration

Premium EC-60

™

controllers will configure for 6S/5M

operation when a reconﬁ guration event is initiated and

the ECU detects that an additional axle PMV is wired as

follows:

PMV Connector ECU Connector

Hold Right Additional Axle Hold

Release Left Additional Axle Release

Common Right Additional Axle Common

See 6S/5M System Schematics (pages 37 & 40) for

details.

Reconﬁ guration Using the Blink Code Switch

The reconﬁ guration event is the same for both Standard

and Premium ECUs. With ignition power removed from the

EC-60

™

controller, depress the blink code switch. After the

ignition power is activated, depress and release the switch

seven times to initiate a reconﬁ guration event.

Diagnostic Tool

A reconﬁ guration event may be initiated using a hand-held

or PC-based diagnostic tool to communicate with the ECU

over the SAE J1587 diagnostic link.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Comentarios a estos manuales

Sin comentarios

BENDIX MC-30 TRAILER ABS CONTROLLER Información técnica Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Modulador BENDIX MC-30 TRAILER ABS CONTROLLER