BENDIX MC-30 TRAILER ABS CONTROLLER Guía para resolver problemas descargar pdf (Pagina 13)

13

CHART 7 - EC-30

™

CONTROLLER BLINK CODE DEFINITIONS (3 of 3)

Check for corroded or damaged modulator wiring and connections. Verify for M-21, M-22, or M-30

that resistance between pins: Hold to Common is 3.5 to 5.0 Ohms, Exhaust to Common is 3.5

to 5.0 Ohms, Exhaust to Hold is 7.0 to 10 Ohms. For M-32 and M-32QR, Verify that resistance

between pins: Hold to Common is 4.9 to 5.5 Ohms, Exhaust to Common is 4.9 to 5.5 Ohms,

Exhaust to Hold is 9.8 to 11 Ohms. Verify no continuity from modulator leads to ground.

Check for corroded or damaged modulator wiring and connections. Verify for M-21, M-22, or M-30

that resistance between pins: Hold to Common is 3.5 to 5.0 Ohms, Exhaust to Common is 3.5

to 5.0 Ohms, Exhaust to Hold is 7.0 to 10 Ohms. For M-32 and M-32QR, Verify that resistance

between pins: Hold to Common is 4.9 to 5.5 Ohms, Exhaust to Common is 4.9 to 5.5 Ohms,

Exhaust to Hold is 9.8 to 11 Ohms. Verify no continuity from modulator leads to ground.

Check for corroded or damaged modulator wiring and connections. Verify for M-21, M-22, or M-30

that resistance between pins: Hold to Common is 3.5 to 5.0 Ohms, Exhaust to Common is 3.5

to 5.0 Ohms, Exhaust to Hold is 7.0 to 10 Ohms. For M-32 and M-32QR, Verify that resistance

between pins: Hold to Common is 4.9 to 5.5 Ohms, Exhaust to Common is 4.9 to 5.5 Ohms,

Exhaust to Hold is 9.8 to 11 Ohms. Verify no continuity from modulator leads to ground.

Check for corroded or damaged modulator wiring and connections. Verify for M-21, M-22, or M-30

that resistance between pins: Hold to Common is 3.5 to 5.0 Ohms, Exhaust to Common is 3.5

to 5.0 Ohms, Exhaust to Hold is 7.0 to 10 Ohms. For M-32 and M-32QR, Verify that resistance

between pins: Hold to Common is 4.9 to 5.5 Ohms, Exhaust to Common is 4.9 to 5.5 Ohms,

Exhaust to Hold is 9.8 to 11 Ohms. Verify no continuity from modulator leads to ground.

Check for corroded or damaged modulator wiring and connections. Verify for M-21, M-22, or M-30

that resistance between pins: Hold to Common is 3.5 to 5.0 Ohms, Exhaust to Common is 3.5

to 5.0 Ohms, Exhaust to Hold is 7.0 to 10 Ohms. For M-32 and M-32QR, Verify that resistance

between pins: Hold to Common is 4.9 to 5.5 Ohms, Exhaust to Common is 4.9 to 5.5 Ohms,

Exhaust to Hold is 9.8 to 11 Ohms. Verify no continuity from modulator leads to ground.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comentarios a estos manuales

Sin comentarios