BENDIX TCH-001-059 Manual de usuario descargar pdf (Pagina 2)

Bulletin No: Page: 2 of

TCH-001-059

3. Mount the compressor and mounting gasket on the compressor mounting bracket and loosely install

the four (4) compressor (M10) mounting bolts previously removed.

4. Using a feeler gauge, measure the distance between the shoulder of the front-left mounting bolt and the

front ﬂ ange of the compressor, as shown below.

5. Move the compressor toward the front (pulley side) or back until a feeler gauge reading between 0.8

and 4.3 mm is reached.

6. Using the torque speciﬁ ed by the OEM, tighten three (3) of the mounting bolts, leaving the front-left

mounting bolt loose.

7. Remove the front-left mounting bolt and re-install the metal tag in its original location under the front-left

mounting bolt.

8. Tighten the front-left mounting bolt using the same OEM speciﬁ ed torque used on the other three

mounting bolts.

9. Follow the Service Data Sheet, SD-01-337, for “Testing Rebuilt Compressor” before placing the vehicle

into service.

Compressor Mounting

Bracket

Compressor Flange

Compressor Mounting

Bracket

Compressor Flange

Compressor Movement

Front-left

Mounting Bolt

Feeler Gauge

(4.3 mm)

Feeler Gauge

(0.8 mm)

Front-left

Mounting Bolt

0.8 – 4.3 mm

(Verify using

Feeler Gauges)

Compressor

Mounting Flange

Front-left

Mounting Bolt

Compressor

Movement

1 2

Sin comentarios

BENDIX TCH-001-059 Manual de usuario Pagina 2