BENDIX TCH-007-001 Manual de usuario descargar pdf (Pagina 6)

HOSE ASSEMBLY INSTRUCTIONS

1. Determine length of hose and cut to length.

2. Place fitting body in soft jaw vice. Install nut, then sleeve on hose. (Refer to Fig. 4

and 5 for correct position of sleeve.)

3. Slip hose on to barrel of fitting body and bottom.

4. Run nut onto fitting body and tighten nut to “0” – 3/16” gap (see Fig. 6). Use wrench

on body nut hex and hold hose when tightening, being careful not to twist, bend, kink

or collapse hose.

FIG. 6

5. Repeat procedure on other end of hose.

1 2 3 4 5 6 7

Sin comentarios

BENDIX TCH-007-001 Manual de usuario Pagina 6