BENDIX M-21-M-22 ANTILOCK MOD ASSY Guía de instalación Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 55
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
®
21
MBS-2 Installation
Pneumatic System
MBS-2 Location and Mounting
The MBS-2 can be located some distance from the relay valve. The air line
connecting the PCM to the relay valve should be 3 to 5 feet in length. This
allows some mounting flexibility, provides good ABS performance, and
complies with brake application and release timing requirements.
Mount the MBS-2 using two grade 8 bolts WNC part number BLT00650
(1/4-20 x 3-1/2") for 1M systems, BLT00732 (1/4-20 x 5-1/2") for 2M systems.
NOTE: Use the grade 8 bolts included with the MBS-2 installation kit.
The bolts must be inserted from the bracket side when installing 2M systems.
An optional mounting bracket (WNC part number 12S00475) is available from Wabash.
The MBS-2 may also be mounted directly to a crossmember by drilling two
mounting holes on 5-3/8" centers.
Figure 15, Typical MBS-2 Mounting
281UX030
Supply
Port
Delivery
Port
Exhaust
Port
Nut
Washer
Air Line
Tubing
ECM
PCM
PCM
Air Line
Tubing
Mounting Bracket
or Crossmember
Mounting
Bolt
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 54 55

Comentarios a estos manuales

Sin comentarios