BENDIX M-21-M-22 ANTILOCK MOD ASSY Guía de instalación descargar pdf (Pagina 51)

MBS-2 Installation

Glossary

2S-1M Two sensor, one modulator system.

2S-2M Two sensor, two modulator system.

4S-1M Four sensor, one modulator system.

4S-2M Four sensor, two modulator system.

Axle-by-Axle Control Axle-by-axle control is available only on 4S-2M

systems. Each sensed axle is controlled

independently based on wheel speeds from both

wheels on a single axle.

Side-by-Side Control Side-by-side control is available only on 4S-2M

systems. Each side of the vehicle is controlled

independently based on wheel speeds from sensed

wheels on each side of the vehicle.

ACM Antilock Control Module. Consists of ECM and

PCMs.

Current Faults Faults that are active when the system is powered up

which cause the malfunction lamp to remain

illuminated.

ECM Electronic Control Module.

Flash Code A series of flashes of the malfunction lamp, providing

fault code identification.

Malfunction Lamp Located on the rear driver side corner of the vehicle

just forward of the rear marker lamp, the malfunction

lamp verifies the system is functioning properly or

alerts the operator if a problem arises with the ABS.

Trailer Warning Lamp Alerts the operator if a problem arises with a system

not related to the basic antilock function. For

example, elevated wheel end temperatures.

MBS-2 Wabash’s ACM that utilizes the in-axle wheel speed

sensor system, including backup control and wheel

end temperature monitoring.

PCM Pneumatic Control Module.

1 2 ... 46 47 48 49 50 51 52 53 54 55

Sin comentarios

BENDIX M-21-M-22 ANTILOCK MOD ASSY Guía de instalación Pagina 51