BENDIX BW2771 Manual de usuario Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 54
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
General Information
21
Pretest Procedures
Step Procedure
M 1. VehicleIgnition:Key-OFF.
2. Measure the resistance across pins 4 and 9 (J1939 High to Ground).
3. Measure the resistance across pins 5 and 9 (J1939 Low to Ground).
a. Iftheresistanceisgreaterthan100Kohmsoropen(InniteResistance).
i. Test Complete.
b. Iftheresistanceisbetween0to100Kohms.
i. Test Failed. Check for shorted connections in the vehicle's J1939 data link harness.
Unplug all J1939 data link components from the data link to isolate a potential
defective component. (See Note)
Note: Refer to vehicle OEM repair manual or contact the OEM for more information on the J1939 data link harness.
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 53 54

Comentarios a estos manuales

Sin comentarios