BENDIX BW2860 Manual de usuario descargar pdf (Pagina 20)

3-8

Symptom Isolation Procedures

Side Sensor Continuously Detecting Targets

Step A Procedure Condition Action

Step B Procedure Condition Action

1. Clear area around sensor

of objects.

2. Key on.

3. Allow Operator Display

Unit to go through self-test

and shows no targets

(yellow LED light should

be on).

1. Key on.

2. Remove Sensor from mounting

position.

3. Move Sensor out away from the

vehicle and place in an open area.

4. Key on.

5. Allow Operator Display

Unit to go through self-test

and shows no targets

(yellow LED light should

be on).

If both LED lights turn on

for .5 seconds – followed by

a red LED for ﬁ ve (5) seconds –

followed by a continuous

yellow light

If both LED lights turn on

for .5 seconds, followed by

a continuous red light

If only red LED lights

If both LED lights turn on

for .5 seconds – followed by

a red LED for ﬁ ve (5) seconds –

followed by a continuous

yellow light

If both LED lights turn on

for .5 seconds, followed by

a continuous red light

Go to Step V.

Go to Step B.

Replace Operator Display Unit.

Reposition sensor on vehicle

to allow clear detection zone.

Go to Step V.

Replace sensor. Go to Step V.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 29 30

Comentarios a estos manuales

Sin comentarios

BENDIX BW2860 Manual de usuario Pagina 20

Comentarios a estos manuales