BENDIX GEN 4 GEN 5 ABS Manual del operador descargar pdf (Pagina 85)

Using the Gen 4 & 5 Diagnostic Options

NEXIQ Brake-Link™ Bendix

& Eaton

ABS Applications 79

To view stored fault codes

via button navigation:

1 Connect Brake-Link™ to the tractor or trailer and power-up (see “Con-

necting Brake-Link™ Components”, on page 20).

2 Register the ECU (see “Register ECU via menu navigation:”, on

page 28).

3 Brake-Link™ instructs you to CONTINUE BY PRESSING BUTTONS;

press .

4 Brake-Link™ shows the stored fault code(s).

— Line 1 shows the System ID (SID) description.

— Line 2 shows the Failure Mode Indicator (FMI) description.

— Line 3 shows the SID value in decimal and hexadecimal, and the

Blink Code value in decimal only.

— Line 4 shows the FMI value in decimal and hexadecimal, and an oc-

currence count. If you’re diagnosing a Gen 5 system with more than

one code, a down arrow appears next to the occurrence count; scroll

the display with the and keys. At the end of the list, the

down arrow disappears and an up arrow appears on the left side of

the screen.

Note: Refer to Appendix B for a list of all supported Generation 4

and 5 Fault Codes.

5 Press to return to the CONTINUE BY PRESSING BUTTONS

prompt or to return to the

Select Application

screen.

SPEED SENSOR C

SHORT HI/LOW OR OPEN

SID:003(03h) B:4-6

FMI:012(0Ch) x:001↓

↓↓

↓

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 111 112

Sin comentarios

BENDIX GEN 4 GEN 5 ABS Manual del operador Pagina 85