BENDIX M-12-M-12R ANTILOCK MODULATOR Especificaciones descargar pdf (Pagina 104)

Windsor-Severence Fire Protection District

Heavy Rescue

Production Specification

SVI #774 Page 104 of 126 April 19, 2010

If the discharge end of hose will terminate with a threaded connection when in use, it shall be equipped with a slow-

operating valve. If the threaded end of the hose terminates in a quick-connection fitting, a slow operating valve and

protective cap shall not be required.

Air hose shall have a ball clamp located near end of hose.

Color Coding

The ends of the hose shall be color coded or marked with a label to designate the operating pressure of the hose. Color

coding shall be as follows:

1. Blue for utility air hose up to a gauge pressure of 300 psi (2000 kPa)

2. White for breathing air hose up to a gauge pressure of 300 psi (2000 kPa)

3. Yellow for breathing air hose from a gauge pressure of 301 psi to 3000 psi (2001 kPa to 20,000 kPa)

4. Red for breathing air hose over a gauge pressure of 3000 psi (20,000 kPa)

HYDRAULIC POWER UNIT

TNT model ET-4.0, 240 VAC electric hydraulic power unit(s) shall be provided and installed as noted under the individual

compartment description section.

Each power unit shall be capable of simultaneous rescue tool operation of two (2) individual tools. Each power unit shall

be mounted in compartment, but easily removable from the apparatus for maintenance purposes. Each power unit shall

be approx. 15" W x 15.75" H x 25.88" D, and weight 95.6 lbs.

HYDRAULIC HOSE REEL

Hydraulic hose reel shall be Hannay EF2014-17-18 high pressure, electric rewind, hydraulic hose reel with a capacity of

100' of dual hose.

The 12 volt electrical rewind circuit shall be directly wired to the chassis battery system with heavy duty stranded copper

cable. The rewind button shall be located adjacent to the hose reel within easy access of Operator.

Each reel shall have a Hannay 4-way roller assembly to permit cable to feed directly off the reel and away from

compartment. Plastic roller assemblies are not acceptable.

Hydraulic hose shall have a ball clamp located near end of hose.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 125 126

Sin comentarios

BENDIX M-12-M-12R ANTILOCK MODULATOR Especificaciones Pagina 104