Windsor-Severence Fire Protection District
Heavy Rescue
Production Specification
SVI #774 Page 54 of 126 April 19, 2010
The mirrors shall be mounted via 1.00 inch diameter tubular stainless steel arms to provide a rigid mounting to reduce
vibration.
The mirrors shall measure 8.00 inches wide X 19.00 inches high and shall include an integral convex mirror in the mirror
head below the flat glass to provide wider field of vision. The flat and convex mirrors shall be motorized with remote
horizontal and vertical adjustment. The control switches shall be mounted within easy reach of the driver. The flat and
convex mirrors shall be heated for defrosting in severe cold weather conditions.
The mirror backs shall be constructed of vacuum formed chrome plated ABS plastic housings that are corrosion resistant
and shall include an amber marker light. The mirrors shall be manufactured with the finest quality non-glare glass.
REARVIEW MIRROR HEAT SWITCH
The heat for the rearview mirrors shall be controlled through a virtual button on the multiplex display.
CAB FENDER
Full width wheel well liners shall be installed on the extruded cab to limit road splash and enable easier cleaning. The two-
piece liners shall consist of an inner liner 16.00 inches wide made of vacuum formed ABS composite and an outer
fenderette 3.50 inches wide made of 14 gauge 304 polished stainless steel.
MUD FLAPS FRONT
The front wheel wells shall have mud flaps installed on them.
CAB EXTERIOR MODEL NAMEPLATE
The cab shall include custom “Gladiator” nameplates on the front driver and officer side doors.
CAB EXTERIOR FRONT & SIDE EMBLEMS
The cab shall include one (1) Spartan emblem installed on the exterior of the cab above each front wheel well.
IGNITION
A master battery system with a keyless start ignition system shall be provided. Each system shall be controlled by a ¼
turn Cole Hersee switch, both of which shall be mounted to the left of the steering wheel on the dash. A chrome push
type starter button shall be provided adjacent to the master battery and ignition switches.
Each switch shall illuminate a green LED indicator light on the dash when the respective switch is placed in the “ON”
position.
The starter button shall only operate when both the master battery and ignition switches are in the “ON” position.
BATTERY
The single start electrical system shall include (6) Harris BCI 31 950 CCA batteries with a 210 minute reserve capacity
and 4/0 welding type dual path starter cables per SAE J541. The cables shall have encapsulated ends with heat shrink
and sealant.
(112 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales