BENDIX M-12-M-12R ANTILOCK MODULATOR Especificaciones Pagina 94

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 126
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 93
Windsor-Severence Fire Protection District
Heavy Rescue
Production Specification
SVI #774 Page 94 of 126 April 19, 2010
CURBSIDE COMPARTMENT - ABOVE REAR WHEEL (C3)
The interior useable compartment width shall be approximately 59.0" wide.
The compartment door opening shall be approximately 52.0" wide.
This compartment shall have a Robinson roll-up door.
The roll-up door shall have an un-painted satin aluminum finish on the door slats and the door trim components.
There shall be NO keyed lock on this roll-up compartment door.
One (1) nylon strap shall be provided to assist in closing the door. The strap shall be fastened to the left side of
the lower inside door sill. The strap shall extend from the left side of the lower inside door sill to a footman loop
attached to the center of the left side of the door frame.
One (1) aluminum drip pan/door finish guard shall be provided with the rollup door.
Compartment threshold protection plate shall be installed on the bottom edge of the compartment door opening. The
threshold protection shall be fabricated from an aluminum extrusion with an anodized exterior finish.
COMPARTMENT COMPONENTS
There shall be vertically mounted aluminum shelf trac for shelving installation.
There shall be one (1) 1,000 lbs. slide-out tray(s) with an OnScene Solutions base approximately 94" deep and as
wide as the compartment layout or door opening permits, capable of extending out either side of the body located
above the level of the chassis frame rails. It shall be vertically adjustable in height.
- 3M™ Diamond Grade™ Conspicuity striping shall be provided on the front and side faces of the tray. The
striping shall be 2" wide and red/white in color.
There shall be one (1) air bag storage module(s). The module shall be designed to hold the following Windsor-
Severance Fire Protection District supplied high pressure air bags:
- Three (3) 24" x 24" HP air bags
- One (1) 31" x 31" HP air bag
- There shall be two (2) OnScene Solutions cargo straps provided to secure the stored equipment.
Two (2) vertically mounted OnScene Solutions LED Nightstiks.
Vista de pagina 93
1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 125 126

Comentarios a estos manuales

Sin comentarios