Windsor-Severence Fire Protection District
Heavy Rescue
Production Specification
SVI #774 Page 23 of 126 April 19, 2010
CAB PAINT WARRANTY
The cab and chassis shall be covered by a limited manufacturer paint warranty which shall be in effect for ten (10) years
from the first owner’s date of purchase or in service or the first 100,000 actual miles, whichever occurs first.
CAB ENGINE TUNNEL
The cab interior shall include an integrated engine tunnel constructed of 5052-H32 Marine Grade, .190 of an inch thick,
aluminum alloy plate. The tunnel shall be a maximum of 41.50 inches wide X 23.00 inches high.
CAB ENTRY DOORS
The cab shall include four (4) entry doors, two (2) front doors and two (2) crew doors as high as possible for ease of
entering and egress when outfitted with an SCBA. The doors shall be full height and constructed of extruded aluminum
with a nominal thickness of .125 inch. The exterior skins shall be constructed of .125 inch aluminum plate.
All cab and crew doors shall be of substantial weight for the optimum strength and rigidity for the best performance in all
cab crash testing. Any cab with front and crew doors manufactured of less than the material thickness of .125 inch in both
the extrusion and exterior skin shall not be considered.
The doors shall include a double rolled style automotive rubber seal around the perimeter of each door frame and door
edge which ensures a weather tight fit.
All door hinges shall be hidden within flush mounted cab doors for a pleasing smooth appearance and perfect fit along
each side of the cab. Each door hinge shall be piano style with a 0.38 inch pin and shall be constructed of stainless steel.
The piano style hinge and hidden flush mounted door is the most favorable construction keeping dirt and debris out of the
hinge allowing for optimum operation throughout the lifetime of the door.
Proposals offering door hinge thickness any less than stated shall not be considered.
Proposals including doors that do not comply with the flush mounting as described or those including exposed hinges
shall not be considered.
CAB ENTRY DOOR TYPE
All cab entry doors shall be full length in design to fully enclose the lower cab steps.
LH EXTERIOR REAR COMPARTMENT
The cab shall offer an exterior compartment on the left side of the cab behind the rear door. The compartment opening
shall be 17.00 inches wide X 21.19 inches high. The compartment size shall be 17.34 inches wide X 21.19 inches high X
21.19 inches deep. The compartment shall have a 16.63 inch wide, 32.00 inch high and 1.50 inch thick hinged box pan
style flush mount door with a bright aluminum tread plate inner panel and a bent D-ring slam latch. There shall be a switch
to activate a light inside the compartment and the open compartment warning light in the cab in the event the door is left
ajar.
LH EXTERIOR REAR COMPARTMENT LIGHTING
There shall be one (1) SoundOff Signal brand LED strip light installed to illuminate the exterior rear compartment on the
left side of the cab. The strip light shall be 10” long and shall include three (3) bright white Gen3 LEDs for long life and low
amp draw.
(112 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales