
Windsor-Severence Fire Protection District
Heavy Rescue
Production Specification
SVI #774 Page 58 of 126 April 19, 2010
INBOARD FRONT WARNING LIGHTS
The cab front fascia shall include dual Whelen series 600 Super LED warning lights which shall offer multiple flash
patterns including steady burn for solid colors and multiple flash patterns for split colors. The lights shall be surface
mounted to the front fascia of the cab within a chrome bezel in the inboard position.
INBOARD FRONT WARNING LIGHTS COLOR
The front warning lights mounted on the fascia in the inboard positions shall be red.
FRONT WARNING SWITCH
The front warning lights shall be controlled through a virtual control on the MUX display. This switch shall be clearly
labeled for identification.
INTERSECTION WARNING LIGHTS
The chassis shall include two (2) Whelen series 600 Super LED 4.00 inch X 6.00 inch intersection warning lights, one (1)
each side, which shall offer multiple flash patterns including steady burn for solid colors and multiple flash patterns for split
colors.
INTERSECTION WARNING LIGHTS COLOR
The intersection lights shall be red.
INTERSECTION WARNING LIGHTS LOCATION
The intersection lights shall be mounted in the rear position on the side of the bumper.
SIDE WARNING LIGHTS
The cab sides shall include a Whelen series 600 Super LED 4.00 inch X 6.00 inch warning light, one (1) each side, which
shall offer multiple flash patterns including steady burn for solid colors and multiple flash patterns for split colors.
SIDE WARNING LIGHTS COLOR
The warning lights located on the side of the chassis shall be red.
SIDE WARNING LIGHTS LOCATION
The warning lights on the side of the cab shall be mounted over the front wheel well directly over the center of the front
axle.
SIDE AND INTERSECTION WARNING SWITCH
The side warning lights shall be controlled through a virtual control on the MUX display. This switch shall be clearly
labeled for identification.
ROTO-RAY WARNING LIGHTS
A Roto-Rays warning light shall be installed via a chrome spacer on the grill. The Roto-Rays light shall consist of three (3)
round chrome heads with LED lights, one (1) red, one (1) clear, and one (1) blue. When activated, the entire three (3)
head assembly shall spin.
Comentarios a estos manuales