Windsor-Severence Fire Protection District
Heavy Rescue
Production Specification
SVI #774 Page 65 of 126 April 19, 2010
ACCIDENT PREVENTION
There shall be a placard in the cab seating area which reads, "ALL OCCUPANTS MUST BE SEATED AND BELTED
WHEN THE APPARATUS IS IN MOTION".
PERSONNEL CAPACITY
A label that states the number of personnel the vehicle is designed to carry shall be located in an area visible to the driver.
ACCIDENT PREVENTION
If the rear bumper is 8" deep or more, there shall be a placard on the rear face of the body, in clear sight from the ground,
which reads, "WARNING - DO NOT RIDE ON STEPS OR DECK AREAS WHILE THE APPARATUS IS IN MOTION.
DEATH OR SERIOUS INJURY MAY RESULT".
WEARING HELMET WARNING
A label stating “DO NOT WEAR HELMET WHILE SEATED” shall be visible from each seating location.
BUMPER GRAVELSHIELD
The bumper extension gravel shield shall be provided by the cab/chassis manufacturer.
RESCUE BUMPER COMPARTMENT
The 28" bumper extension shall have three (3) compartments. There shall be two (2) compartments outboard of the frame
rail, each capable of storing one Hannay Rescue Reel. There shall be one (1) compartment between the chassis frame
rails to store hydraulic tools.
A single lid shall cover all three (3) compartments. The lid shall be 1/8" NFPA compliant aluminum tread plate with
stainless steel hinges and single point lift/turn latches. The compartment lid shall have two (2) pneumatic spring devices,
one (1) at each end.
Compartment shall have a surface mounted light near door opening that will be automatically activated when door is
opened, and switched for compartment door ajar warning system provided in cab.
Rubber bumpers shall be provided as required to prevent door from hitting cab.
The following shall be located in the bumper:
One (1) Hannay EF2016-17-18 hydraulic hose reel(s) capable of storing 100' of dual line hydraulic hose. The
rewind button for each reel shall be located adjacent to the reel it controls.
- The specified hydraulic hose reel(s) shall be plumbed with one (1) TNT, model RV120, remote dump valve(s)
which will allow quick disconnection of the attached hydraulic tool from the hose mounted on reel.
- The hydraulic reel shall be equipped with 100' of TNT dual hydraulic hose. The hose shall be Black in color.
- The hydraulic reel shall connect to the hydraulic pump with a 36' TNT pigtail. The hose shall be Black in
color.
(112 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales