BENDIX M-12-M-12R ANTILOCK MODULATOR Especificaciones descargar pdf (Pagina 125)

Windsor-Severence Fire Protection District

Heavy Rescue

Production Specification

SVI #774 Page 125 of 126 April 19, 2010

REAR TRIPOD SCENE LIGHTS

Two (2) Fire Research Focus, model FCA656-S75, tripod telescopic light shall be provided. The light pole shall be

anodized aluminum and have a knurled twist lock mechanism to secure the extension pole in position. The extension

pole shall extend 28" and rotate 360 degrees. An internal brake shall slow the extension pole during lowering. The outer

pole shall be a grooved aluminum extrusion. The folding legs shall be anodized aluminum tubing with plastic endcaps.

The fully extended tripod system shall exceed a height of 8' and be less than 5' when collapsed. Wiring shall extend from

the pole bottom with a 4' retractile cord.

The lamphead shall have one (1) quartz halogen 750 watt 120 volt bulb. The bulb shall draw 6.3 amps and generate

19,600 lumens. The bulb shall be accessible through the front. The lamphead shall direct 50 percent of the light onto the

action area while providing 50 percent to illuminate the working area. The lamphead angle of elevation shall be

adjustable at a pivot in the mounting arm and the position locked with a round knurled locking knob. The lamphead shall

incorporate heat-dissipating fins and be no more than 5" deep by 3 3/8" high by 10" wide. Scene lights shall be provided

with a lens or a means for preventing damage from water spray and shall be listed for wet location usage.

A weatherproof on-off toggle switch shall be mounted in a switchbox below the lamphead. A wire guard shall be furnished

to protect the lamphead glass.

A tripod truck mount bracket set shall be provided for each light. Each set shall include a lower base plate, an upper lock

with a quick release spring loaded locking pin, and a shim set.

COMMAND LIGHT TOWER WITH METAL HALIDE BULB OPTION AND LOWER BANK BACKLIGHT

The apparatus shall be equipped with one (1) all-electric Command Light(s). The unit shall not require tapping into vehicle

braking system to be operated, eliminating the chance for vehicle brake problems. Hydraulic or pneumatic type floodlights

are not acceptable alternatives to the all-electric light tower specified.

The light bank shall have four (4) weatherproof, 1,500 watt, 240-volt quartz halogen lights and (2) two 1,000 watt metal

halide lights. Light heads shall be mounted in three (3) pairs, giving two (2) vertical lines of three (3) when the lights are in

the upright position. Power for light bank shall be transmitted through power collecting rings thus allowing 360+ degree

continuous rotation in either direction

The lower pair of light heads shall be capable of being rotated about a horizontal axis to provide light down on the vehicle

or to the opposite side of the vehicle.

Positioning of the light bank shall be accomplished with maintenance free, heavy-duty 12-volt linear actuators.

The Command Light assembly shall be all aluminum construction, with stainless steel shafts and bronze bushings for long

life and low maintenance.

Light tower shall be controlled with a hand-held umbilical line remote control. Command Light to be equipped with "Auto-

Park" automatic nesting feature.

Command Light controls shall feature:

1. Three (3) switches, one (1) for each light bank

2. One (1) light bank rotation switch

3. One (1) switch for elevating lower stage

4. One (1) switch for elevating upper stage

5. One (1) light to indicate when light bank is out of roof nest position

6. One (1) light to indicate when light bank is rotated to proper nest position

Command Light controls shall be located per itemized compartment list.

1 2 ... 120 121 122 123 124 125 126

Heavy Rescue 1

Comentarios a estos manuales

Sin comentarios

BENDIX M-12-M-12R ANTILOCK MODULATOR Especificaciones Pagina 125

Comentarios a estos manuales

Relacionado con productos y manuales para Modulador BENDIX M-12-M-12R ANTILOCK MODULATOR