BENDIX M-12-M-12R ANTILOCK MODULATOR Especificaciones descargar pdf (Pagina 99)

Windsor-Severence Fire Protection District

Heavy Rescue

Production Specification

SVI #774 Page 99 of 126 April 19, 2010

HEAVY DUTY 100% EXTENSION EQUIPMENT SLIDE - (1,000 LB. CAPACITY)

Heavy duty slide-out equipment tray(s) shall be provided in exterior compartment as indicated in the numbered

compartment list.

Trays shall be fabricated from 3/16" (.188) aluminum 3003H-14 alloy smooth plate. Trays shall be built with welded

corners to form a box type tray surface with an internal depth of approximately 3 1/2 inches. The tray shall be mounted on

a OnScene Solutions slide frame constructed of anodized aluminum extrusion(s). The frame shall be assembled using

stainless steel fasteners (no welds). Each slide shall use a three extrusion rail design utilizing twelve to sixteen (12 - 16)

urethane rollers. Each roller shall contain two (2) precision roller bearings mounted in an aluminum hub with a molded on

urethane cover. The rollers shall not lose contact with the rail extrusion during operation of the slide unit.

Each slide shall have a cable operated, spring loaded latch complimented by a large hand opening and red pull handle

(Pull to Release). The slide shall lock in the closed and full extension positions. The slide shall be rated for a maximum

evenly distributed load of 1,000 lbs.

HEAVY DUTY 70% EXTENSION EQUIPMENT SLIDE TRANSVERSE (1,000 LBS. CAPACITY)

Heavy duty slide-out equipment tray(s) shall be provided in exterior compartment as indicated in the numbered

compartment list.

Trays shall be fabricated from 3/16" (.188) aluminum 3003H-14 alloy smooth plate. Each tray shall be built with a 4" high

vertical lip with welded corners to form a box type tray surface. The tray shall be mounted on a OnScene Solutions slide

frame constructed of anodized aluminum extrusion(s). The frame shall be assembled using stainless steel fasteners (no

welds). Each slide shall use a two extrusion rail design utilizing twenty (20) urethane rollers. Each roller shall contain two

(2) precision roller bearings mounted in an aluminum hub with a molded on urethane cover.

Each slide shall have two (2) cable operated, spring loaded latches operated by two (2) large hand openings with red pull

handles (Pull to Release). The slide shall lock in the closed and full extension position in two (2) directions. The slide

shall be rated for a maximum distributed load of 1,000 lbs.

HEAVY DUTY EQUIPMENT TRAYS - SLIDE OUT AND DOWN ( 150 LBS. CAPACITY)

Heavy duty slide-out equipment tray(s) shall be provided in exterior compartment as indicated in the numbered

compartment list.

Trays shall be fabricated from 3/16" (.188) aluminum 3003H-14 alloy smooth plate. Each tray shall be built with a 4" high

vertical lip with welded corners to form a box type tray surface. The tray shall be mounted on a OnScene Solutions slide

frame constructed of anodized aluminum extrusion(s). The frame shall be assembled using stainless steel fasteners (no

welds). Each slide shall use a two extrusion rail design utilizing four (4) urethane rollers. Each roller shall contain two (2)

precision roller bearings mounted in an aluminum hub with molded on urethane cover. The roller shall not lose contact

with the rail extrusion during operation of the slide unit.

Each slide shall have a cable operated, spring loaded latch complimented by a large hand opening and red pull handle

(Pull to Release). The slide shall lock in the closed position. The slide shall be rated for a maximum evenly distributed

load of 150 lbs.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 125 126

Sin comentarios

BENDIX M-12-M-12R ANTILOCK MODULATOR Especificaciones Pagina 99