
Windsor-Severence Fire Protection District
Heavy Rescue
Production Specification
SVI #774 Page 43 of 126 April 19, 2010
CAB TILT CONTROL RECEPTACLE
The cab tilt shall include a receptacle which shall be temporarily located on the right hand chassis rail rear of the cab to
provide a place to plug in the cab tilt remote control pendant. The tilt pump shall include 8.00 feet of cable with a 6-pin
Deutsch connector that includes a cap. The remote control pendant shall also include 20.00 feet of cable which also
includes a mating connector.
CAB WINDSHIELD
The cab windshield shall have a surface area of 2884.00 square inches and be of a two (2) piece wraparound design for
maximum visibility.
The distance from the driver and officer to the windshield shall be a minimum of 42.00 inches at the furthest seated
position. This distance shall ensure the safety of the driver and officer from intruding objects in the unlikely event of a
head on collision.
The glass utilized for the windshield a standard automotive tint. The left and right windshield shall be fully interchangeable
thereby minimizing stocking and maintenance costs. All proposals offering windshields not in compliance with the
minimum measurement of surface area stated above and are not fully interchangeable shall not be considered.
GLASS FRONT DOOR
The front cab doors shall include a window which is 27.00 inches in width X 26.00 inches in height. These windows shall
have the capability to roll down completely into the door housing. This shall be accomplished manually utilizing a crank
style handle on the inside of the door. A reinforced window regulator assembly shall be provided for severe duty use.
There shall be an irregular shaped fixed window which shall measure 2.50 inches wide at the top, 8.00 inches wide at the
bottom X 26.00 inches in height, more commonly known as “cozy glass” ahead of the front door roll down windows.
The windows shall be mounted within the frame of the front doors trimmed with a black anodized ring on the exterior.
GLASS TINT FRONT DOOR
The windows located in the left and right front doors shall have a standard green automotive tint which shall allow
seventy-five percent (75%) light transmittance.
GLASS REAR DOOR RH
The rear right hand side door shall include a window which is 27.00 inches in width X 26.00 inches in height. This window
shall roll up and down manually utilizing a crank style handle on the inside of the door. A reinforced window regulator
assembly shall be provided for severe duty use.
GLASS TINT REAR DOOR RH
The window located in the right hand side rear door shall include a standard green automotive tint which shall allow
seventy-five percent (75%) light transmittance.
GLASS REAR DOOR LH
The rear left hand side door shall include a window which is 27.00 inches in width X 26.00 inches in height. This window
shall roll up and down manually utilizing a crank style handle on the inside of the door. A reinforced window regulator
assembly shall be provided for severe duty use.
Comentarios a estos manuales