BENDIX M-12-M-12R ANTILOCK MODULATOR Especificaciones Pagina 11
- Pagina / 126
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Windsor-Severence Fire Protection District
Heavy Rescue
Production Specification
SVI #774 Page 11 of 126 April 19, 2010
CONSTRUCTION DOCUMENTATION
The contractor shall supply, at the time of delivery, at least one (1) copy of the following documents:
1. The manufacturers record of apparatus construction details, including the following information:
(a) Owner’s name and address
(b) Apparatus manufacturer, model, and serial number
(c) Chassis make, model, and serial number
(d) GAWR of front and rear axles and GVWR
(e) Front tire size and total rated capacity in pounds (kilograms)
(f) Rear tire size and total rated capacity in pounds (kilograms)
(g) Chassis weight distribution in pounds (kilograms) with water and manufacturer-mounted equipment (front and
rear)
(h) Engine make, model, serial number, rated horsepower and related speed, and governed speed; and if so
equipped, engine transmission PTO(s) make, model, and gear ratio
(i) Type of fuel and fuel tank capacity
(j) Electrical system voltage and alternator output in amps
(k) Battery make, model, and capacity in cold cranking amps (CCA)
(l) Chassis transmission make, model, and serial number; and if so equipped, chassis transmission PTO(s) make,
model, and gear ratio
(m) Ratios of all driving axles
(n) Maximum governed road speed
(o) Pump make, model, rated capacity in gallons per minute (liters per minute where applicable), and serial number
(p) Pump transmission make, model, serial number, and gear ratio
(q) Auxiliary pump make, model, rated capacity in gallons per minute (liters per minute where applicable), and serial
number
(r) Water and Foam tank certified capacity in gallons or liters
(s) Paint manufacturer and paint number(s)
(t) Company name and signature of responsible company representative
(u) Weight documents from a certified scale showing actual loading on the front axle, rear axle(s), and overall fire
apparatus (with the water tank full but without personnel, equipment, and hose)
2. Certification of compliance of the optical warning system
3. Siren manufacturer’s certification of the siren
4. Written load analysis and results of the electrical system performance tests
5. Certification of slip resistance of all stepping, standing, and walking surfaces
6. If the apparatus has a fire pump, the pump manufacturer’s certification of suction capability
7. If the apparatus is equipped with a fire pump and special conditions are specified by the purchaser, the pump
manufacturer’s certification of suction capacity under the special conditions
8. If the apparatus has a fire pump, a copy of the apparatus manufacturer’s approval for stationary pumping applications
9. If the apparatus has a fire pump, the engine manufacturer’s certified brake horsepower curve for the engine furnished,
showing the maximum governed speed
10. If the apparatus has a fire pump, the pump manufacturer’s certification of the hydrostatic test
11. If the apparatus has a fire pump, the certification of inspection and test for the fire pump
12. If the apparatus is equipped with an auxiliary pump, the apparatus manufacturer’s certification of the hydrostatic test
13. When the apparatus is equipped with a water tank, the certification of water tank capacity
14. If the apparatus has an aerial device, the certification of inspection and test for the aerial device
15. If the apparatus has a foam proportioning system, the foam proportioning system manufacturer’s certification of
accuracy and the final installer’s certification the foam proportioning system meets this standard
16. If the system has a CAFS, the documentation of the manufacturer’s pre delivery tests
17. If the apparatus has a line voltage power source, the certification of the test for the power source
18. If the apparatus is equipped with an air system, air tank certificates, the SCBA fill station certification (see 24.9.7), and
the results of the testing of the air system installation
Any other required manufacturer test data or reports
Relacionado con productos y manuales para Modulador BENDIX M-12-M-12R ANTILOCK MODULATOR
Modulador BENDIX GEN 4 GEN 5 ABS Manual del operador
(112 paginas)
(112 paginas)
Modulador BENDIX GEN 4 GEN 5 ABS Manual de usuario
(10 paginas)
(10 paginas)
Modulador BENDIX GEN 4 GEN 5 ABS Guía de usuario
(24 paginas)
(24 paginas)
Modulador BENDIX GEN 4 GEN 5 ABS Guía de usuario
(16 paginas)
(16 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.049 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales