Windsor-Severence Fire Protection District
Heavy Rescue
Production Specification
SVI #774 Page 95 of 126 April 19, 2010
CURBSIDE COMPARTMENT - REAR (C4)
The interior useable compartment space shall be approximately 70.0" wide.
The compartment door opening shall be approximately 63.0" wide.
This compartment shall have a Robinson roll-up door.
The roll-up door shall have an un-painted satin aluminum finish on the door slats and the door trim components.
There shall be NO keyed lock on this roll-up compartment door.
One (1) nylon strap shall be provided to assist in closing the door. The strap shall be fastened to the left side of
the lower inside door sill. The strap shall extend from the left side of the lower inside door sill to a footman loop
attached to the center of the left side of the door frame.
One (1) aluminum drip pan/door finish guard shall be provided with the rollup door.
Compartment threshold protection plate shall be installed on the bottom edge of the compartment door opening. The
threshold protection shall be fabricated from an aluminum extrusion with an anodized exterior finish.
COMPARTMENT COMPONENTS
There shall be vertically mounted aluminum shelf trac for shelving installation.
There shall be one (1) 750 lbs. slide-out tray(s) with an OnScene Solutions base approximately 46" deep and as
wide as the compartment layout or door opening permits located above the level of the chassis frame rails.
- 3M™ Diamond Grade™ Conspicuity striping shall be provided on the front and side faces of the tray. The
striping shall be 2" wide and red/white in color.
There shall be one (1) 1,000 lbs. slide-out tray(s) with an OnScene Solutions base approximately 94" deep,
capable of extending out either side of the body located above the level of the chassis frame rails. (Specified in
opposite side compartment.)
- 3M™ Diamond Grade™ Conspicuity striping shall be provided on the front and side faces of the tray. The
striping shall be 2" wide and red/white in color.
A storage hopper shall be provided in this compartment for approximately 150 pounds of "Floor-Dry". The hopper
shall be loaded from the upper body compartment and shall dispense through a flex tubing stored inside the body.
A PVC 1/4-turn valve shall be provided in the lower section of the body compartment to control floor-dry flow.
The floor of the compartment above the frame rails shall be extended to the interior edge of the door. The floor
shall have a 2" vertical lip and a 1" return to increase strength.
One (1) Hannay EF2016-17-18 hydraulic hose reel(s) capable of storing 100' of dual line hydraulic hose. The
rewind button for each reel shall be located adjacent to the reel it controls.
- The specified hydraulic hose reel(s) shall be plumbed with one (1) TNT, model RV120, remote dump valve(s)
which will allow quick disconnection of the attached hydraulic tool from the hose mounted on reel.
- The hydraulic reel shall connect to the hydraulic pump with a 36' TNT pigtail. The hose shall be Red in color.
(112 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales