Windsor-Severence Fire Protection District
Heavy Rescue
Production Specification
SVI #774 Page 98 of 126 April 19, 2010
SIDE BODY PROTECTION - RUB RAIL
There shall be side rub rails provided below the compartment door openings on both the streetside and curbside. The rub
rail shall be fabricated from 6063 extruded aluminum, measuring approximately 2-3/4" high x 1-3/8" thick with tapered
aluminum end caps. The rub rail shall be bolted to the body using stainless steel bolts and 1-1/2" diameter x 5/8" thick
rubber mount isolators to prevent damage to the body. The rails shall incorporate LED clearance marker lighting
recessed into the rail fascia to avoid damage to the light in case of impact. The rub rail shall have an accessory mounting
track integrated into the backside of the rail to allow mounting of accessories such as ground lighting.
- 3M™ Diamond Grade™ Conspicuity striping shall be provided in the rub rail. The striping shall be red/white
in color.
FRONT GRAVEL GUARDS
Gravel guards shall be fabricated of brushed stainless steel. Gravel guards shall be installed on the front lower body
corners and shall wrap around the corners to the front compartment door hinge on each side.
COMPARTMENT COMPONENTS DESCRIPTIONS
All interior compartment components shall be fabricated as follows:
ADJUSTABLE SHELVING HARDWARE
Adjustable shelving hardware shall be provided indicated in the numbered compartment list.
The shelving hardware shall include a minimum of four (4) aluminum shelf tracs mounted vertically on compartment side
walls or vertical partitions. There shall be one (1) cast aluminum shelf bracket per vertical shelf trac to mount each shelf,
tray, or adjustable storage module. Shelving hardware shall be of heavy duty quality with unlimited vertical adjustment
settings.
ADJUSTABLE SHELF/SHELVES
Adjustable shelf/shelves shall be provided in exterior compartment as indicated in the numbered compartment list.
Shelves shall be fabricated from 3/16" (.188) aluminum 3003H-14 alloy smooth plate with a 2" vertical flange along the
front and rear edges. Shelves shall be designed to be used with flanges either in the upward position to hold various
equipment on shelf, or in the downward position for sweep-out shelf surface.
All shelves shall be fully adjustable, from top to bottom of the compartment. There shall be at least four (4) vertical
mounting channels and shelving hardware, two (2) each side of compartment. Shelving hardware shall be of heavy duty
quality with unlimited vertical adjustment settings.
SLIDE-OUT EQUIPMENT TRAY - (400 LB CAPACITY)
Slide-out equipment tray(s) shall be provided in exterior compartment, as indicated in the numbered compartment list.
Trays shall be fabricated from 3/16" (.188) aluminum 3003H-14 alloy smooth plate. Trays shall be built with a 3" vertical
lip, with welded corners, to form a box type tray surface. Sliding tracks shall be Accuride 502 series. The length shall be
per numbered compartment list and the extension shall be 100% of the slide length. Slides shall be constructed of formed
steel with ball bearings mounted in triple track rails. The tray shall be rated for a maximum 400 lbs. evenly distributed
load.
Tray(s) shall utilize a pneumatic cylinder mounted on underside to hold the tray in both the extended and closed positions.
(112 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales