Windsor-Severence Fire Protection District
Heavy Rescue
Production Specification
SVI #774 Page 48 of 126 April 19, 2010
CAB PAINT INTERIOR DOOR TRIM
The inner door panel surfaces shall be painted with a Zolatone #20-72 silver gray texture finish.
DOOR TRIM CUSTOMER NAMEPLATE
The interior door trim on the front doors shall include a customer nameplate which states the vehicle was custom built for
their Department.
CAB DOOR TRIM REFLECTIVE
The interior of each door shall include high visibility reflective tape. A white reflective tape that measures 1.00 inch in
width shall be provided vertically along the rear outer edge of the door. The lowest portion of each door skin shall include
a reflective tape chevron with red and white stripes and a Spartan logo. The chevron tape shall measure 6.00 inches in
height.
INTERIOR GRAB HANDLE "A" PILLAR
A rubber covered 11.00 inch grab handle shall be provided on the inside of the cab on the hinge post at the driver and
officer doors. The handle shall assist personnel in exiting and entering the cab.
INTERIOR GRAB HANDLE FRONT DOOR
Each front door shall include one (1) ergonomically contoured 9.00 inch cast aluminum handle mounted horizontally on
the interior door panels. The handles shall feature a textured black powder coat finish to assist personnel entering and
exiting the cab.
INTERIOR GRAB HANDLE REAR DOOR
A black powder coated cast aluminum assist handle shall be provided on the inside of each rear crew door. A 30.00 inch
long handle shall extend horizontally the width of the window just above the window sill. The handle shall assist personnel
in exiting and entering the cab.
DASH PANEL GROUP
The main center dash area shall include three (3) removable panels located one (1) to the right of the driver position, one
(1) in the center of the dash and one (1) to the left of the officer position. The center panel shall be within comfortable
reach of both the driver and officer.
SWITCHES CENTER PANEL
The center dash panel shall include six (6) switch positions in the upper left portion of the panel.
A rocker switch with a blank legend installed directly above shall be provided for any position without a switch and legend
designated by a specific option. The non-specified switches shall be two-position, black switches with a green indicator
light. Each blank switch legend can be custom engraved by the body manufacturer. All switch legends shall have red
backlighting provided.
SWITCHES LEFT PANEL
The left dash panel shall include one (1) windshield wiper/washer control switch located in the left hand side of the panel.
The switch shall have red backlighting provided.
(112 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales