BENDIX M-12-M-12R ANTILOCK MODULATOR Especificaciones Pagina 76

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 126
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 75
Windsor-Severence Fire Protection District
Heavy Rescue
Production Specification
SVI #774 Page 76 of 126 April 19, 2010
REFLECTIVE STRIPE - BODY SIDES
A 10" minimum reflective stripe shall be affixed to the sides of the body.
The stripe material shall be 3M Scotchcal 680.
This reflective stripe shall be printed gradient colors from red on front to gold at rear.
There shall be a 2" Scotchcal reflective stripe located 1" above and a second 2" Scotchcal reflective stripe located
1" below the main stripe.
This reflective stripe shall be gold in color.
The stripe shall extend straight back from the lower cab and on rear cab doors it shall form a "Z" and then extend
straight back to the rear of the body above wheel wells.
All striping on this unit to exactly match existing Windsor-Severance Fire Protection District vehicles.
CHEVRON REFLECTIVE STRIPE - REAR SIDES PANELS
At least 50 percent of the rear-facing vertical surfaces, visible from the rear of the apparatus, excluding any pump panel
areas not covered by a door, shall be equipped with retroreflective striping in a chevron pattern sloping downward and
away from the centerline of the vehicle at an angle of 45 degrees. Each stripe shall be 6" width.
The rear side panels only of the body shall have a Chevron style reflective stripe layout, and cover as much of the rear
side panels as possible. Chevron panels shall have a 3M UV over laminate to protect from UV rays, scene damage, and
everyday use. Chevron panels shall have a minimum 10 year warranty for material failure, and colorfastness.
1. The stripe material shall be 3M Diamond Grade.
All retroreflective materials required shall conform to the requirements of ASTM D 4956, Standard Specification for
Retroreflective Sheeting for Traffic Control, Section 6.1.1 for Type I Sheeting.
This reflective Chevron stripe shall alternate red and yellow in color.
LETTERING
The following lettering shall be furnished and installed on the completed unit:
SIDE CAB DOOR LETTERING
There shall be thirty two (32) 3" high reflective letters furnished and installed on the vehicle.
"WINDSOR" - Arched, above door logo
"SEVERANCE" - Arched, below door logo
This reflective lettering shall be gold with a black outline in color.
Vista de pagina 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 125 126

Comentarios a estos manuales

Sin comentarios