BENDIX M-12-M-12R ANTILOCK MODULATOR Especificaciones Pagina 85

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 126
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 84
Windsor-Severence Fire Protection District
Heavy Rescue
Production Specification
SVI #774 Page 85 of 126 April 19, 2010
STREETSIDE COMPARTMENT - AHEAD OF REAR WHEELS (S2)
The interior useable compartment width shall be approximately 64.0" wide.
The compartment door opening shall be approximately 57.0" wide.
This compartment shall have a Robinson roll-up door.
The roll-up door shall have an un-painted satin aluminum finish on the door slats and the door trim components.
There shall be NO keyed lock on this roll-up compartment door.
One (1) nylon strap shall be provided to assist in closing the door. The strap shall be fastened to the left side of
the lower inside door sill. The strap shall extend from the left side of the lower inside door sill to a footman loop
attached to the center of the left side of the door frame.
One (1) aluminum drip pan/door finish guard shall be provided with the rollup door.
Compartment threshold protection plate shall be installed on the bottom edge of the compartment door opening. The
threshold protection shall be fabricated from an aluminum extrusion with an anodized exterior finish.
COMPARTMENT COMPONENTS
There shall be vertically mounted aluminum shelf trac for shelving installation.
There shall be one (1) 1,000 lbs. slide-out tray(s) with a OnScene Solutions base approximately 50" deep x 20"
wide located above the level of the chassis frame rails on right side of door opening.
- The tray shall have a vertical mounting surface located in center of tray approximately 50" deep for mounting
of the specified air pack brackets.
- 3M™ Diamond Grade™ Conspicuity striping shall be provided on the front and side faces of the tray. The
striping shall be 2" wide and red/white in color.
There shall be one (1) transverse module for the following long tools and equipment:
- Two (2) Windsor-Severance Fire Protection District supplied backboard(s). Manufacturer, model number and
dimensions of the backboard(s) shall be provided during the pre-construction meeting.
- There shall be two (2) OnScene Solutions cargo straps provided to secure the stored equipment.
There shall be one (1) SCBA cylinder storage module for 8" OD PVC tubing.
- The SCBA cylinder module shall be capable of storing twelve (12) SCBA cylinders up to 7.5" diameter.
There shall be six (6) Zico 1000 series KD-UH walkaway type SCBA air pack bracket(s) with high cycle coated
spring clips and angled foot plate (no CRS strap inc.).
One (1) Lista Drawer Cabinet model HS-0450-04LM-NB-RG-LG-IDL.
Vista de pagina 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 125 126

Comentarios a estos manuales

Sin comentarios